Stainless Steel Laboratory Fume Hood 5 Feet

Stainless Steel Standard Type Laboratory Fume Hood 5 Feet
 
Working Principle
After properly connected with the laboratory ventilation system, the fume hood can effectively remove harmful gases generated during the experiment and protect the safety of the laboratory personnel.
 
The laboratory fume hood must be equipped with a guide plate and BYPASS system to control the air flow pattern inside the hood and the air distribution at the opening.
 
BYPASS port is provided above the fume hood door. When the door is lowered, BYPASS port is opened, allowing external air to be fed into the hood to maintain the surface wind speed, maintain the balance between the indoor ventilation system and the air consumption volume of the fume hood, and obstruct the increase of surface wind speed due to the decrease of the door, avoiding the impact on the operator.
 
Features
Upper Hood adopts double-layer structure design.
- The outer layer material is 304 or 316L top quality stainless steel plate, the thickness is greater than or equal to 1.2mm. The whole body has strong corrosion resistance.
- The inner layer is made of 1.2mm thick stainless steel plate or 5mm thick compact laminate.

• Visible Window: double suspended glass door, the material is aluminum alloy frame is inlaid with 6mm tempered glass, can be open up and down, easy to operate.

• Lighting: hidden light source, 30W explosion-proof fluorescent lamp is installed on the roof, ensuring the working face not below the height standard 450LUX, not contact with the gas inside the cabinet, easy to replace.

• Transmission/Drive: suspended glass door/window is drived by
  T02 model: sync belt, sync pulley, balance weight in the back.
  T01 model: guide rail, steel wire cable, pulley set, balance weight in the side.
  Can be open up and down flexibly and conveniently, small noise.

• Operation Panel: use professionally designed tri-pole multi-function sockets 10A or 16A, with design of dustproof, acid-proof and waterproof; and equipped with leakage protection switch, effectively ensure the safety of personnel and system.

Lower Cabinet
1.2mm thick stainless steel plate is used for bending and forming, with strong corrosion resistance.
U type stainless steel handle or Bent type integral molding stainless steel handle
stainless steel butt hinge

Worktop: 19mm thick stainless steel plate lined with wooden board. solid core physicochemical board or Epoxy board or Ceramic board is optional. 

Technical Specifications
           Name                                                    Dimension                       Model
Stailnless Standard Type Fume Hood     1500*850*1500mm            XC-FH1500SS
Notes:
1. We can design and manufacture non-standard dimension as per user's request.
2. The price abve is for fume hood itself only, excluding vent blower, vent pipe& elbow, water sink&tap, flow control valve and cock, gas tap, eyewasher.

More Models for Option

Packaging&Shipping
Both of weight and dimension are big, lab benches, fume hoods or lab cabinets are generally going to be shipped by Sea;
They would be packed in cardboard boxes (FCL shipping) or plywood boxes(LCL shipping) in assembled or disassembled state.

While Air shipping is available if you accept the shipping cost.

Application
- Electronics industry: dust free chamber, waste water& waste gas discharge from semiconductor factory, and equipment of related industries, etc
- Chemical industry: acid - resistant&alkali - resistant solution tank, washing tower, air duct and air pollution treatment equipment, etc
- Electroplating industry PCB plating, hardware plating, plastic plating, electrolyte tank and cleaning, filtration equipment, etc
- Food industry: food processing equipment, containers and kitchen cutting boards, etc
- biological pharmacy, biological analysis, plant culture, environmental test, electronic instruments and scientific research, etc

Company Profile
Xuecheng Global Trader Co., Ltd is one professional industry and trade company for lab furniture, integrating production, R&D, sales, installation and after-sale service, located in beautiful Sailing City- Qingdao, China.

After years' development, we have grown into one diversified company, engaged in all kinds of lab furniture, lab equipment, medical equipment, etc

Workshop& Production Line
1. Raw materials preparation (kinds of pp/ABS/wood boards, steel plates, furniture hardware accessories, etc)
2. Cutting
3. Punching
4. Welding
5. Bending
6. Baking and Painting(semi- product)
7. Assembly
8. Packing
7. Shipping

Certification
CE, SGS


linktr.ee/xuechenglab
(+86) (13808961232)
laurence.lu(a)xuecheng-globe(.)com
sales(a)xuecheng-globe(.)com
XUECHENG-GLOBE(.)COM
XUECHENG-GLOBE-NET(.)ECER(.)COM
FACEBOOK(.)COM/XUECHENGLAB
INSTAGRAM(.)COM/XUECHENGLAB