Standard Type All Steel Structure Lab Fume Cupboard 1500X850X2350mm

All Steel Structure Standard Type Lab Fume Cupboard 1500*850*2350mm

Fume hood is one kind of lab furniture, essential for laboratory, which plays the role of exhaust and ventilation. It is one of the most commonly used local exhaust equipment in the laboratory.

The structure of standard Type fume hood is upper-lower type, there is an exhaust hole at the top, which can be installed with vent blower.

The upper hood has lining baffles, controller, lamp, sockets, etc.
and the visible window adopts tempered glass, can be moved up-down, freely operated by the personnel.

The lower cabinet is wall bench type, the upper is worktop, the lower is cabinet body, the worktop can be installed with water sink&tap.

Features
Upper Hood: adopts double-layer structure design. 
- The outer layer is steel shell, with 1.0mm thick galvanized steel plate stamped and bent into one piece, the surface is coated by electrostatic spraying epoxy resin powder, acid and alkali resistance, corrosion resistance, the adhesive force of its spraying epoxy resin protective coating is good after the test of drop impact; 
- The inner layer is lining baffles, use 5-6 mm thick compact laminate (compact chemical base board) to make, including top baffle, side baffle, back baffle, guide baffle, coated by electrostatic spraying epoxy resin powder, has excellent effect for moisture resistance, bending resistance and impact resistance;

1. The guide baffles adopt 3-section exhaust design, can eliminate the exhaust dead corners and contribute to discharge gases with different densities; also keep the fume hood section face velocity at about 0.5m/s (100fpm).
2. It adopts side or back counterweight structure and knock-down movable baffles(with maintenance window), which is convenient for maintenance and upgrade of counterweight, water, electricity and gas.

- Sash(Sliding Window) System 

1. Visible window: ≥5mm thick anti-explosion tempered glass, slides smoothly, can stop at any position of the track, which is convenient to operate; the max opening height is not more than 750mm.
2. Steel-wire Rope drive or Belt drive counterweight 
3. Metal window frame and alum-alloy U type handle or PP integrative handle

- Electrical System 

1. Controller: LCD screen intelligent control panel is set on one side of outer column, which is convenient for observation and operation. 
2. Socket:60*60mm, use 10A/16A 220V multifunctional sockets with dust-spray proof protecting cover, suitable for all kinds of lab equipment. 
3. Lighting: use integrative LED lamp, hidden in the top baffle, will not be in touch with the gases of the fume hood, easy to be changed, the luminance is enough for experiment purpose. 
4. Circuit Breaker: equipped with overload and short circuit protection safety device.

- Ventilation System
1- Fan: according to the actual use requirements, use PP material axial fan or centrifugal fan, acid&alkali resistance, weathering resistance, with noise less than 65dB, installed on the top of the fume hood;
PE centrifugal fan is optional to be installed outdoor.
Air Outlet diameter: Φ250/300 mm
2- Duct (including, T duct, reducer, elbow): made of PVC or PP corrosion-resistant material, directly discharged outside the wall or to the designated location. (dimensions are determined on site)
3- Manual or Electric air valve can be selected according to the actual situation.

Lower Cabinet: 
- Worktop: generally use 12.7mm thick solid core physicochemical board, acid and alkali resistant, corrosion resistance.
Optional: epoxy resin board, ceramic board, marble or stainless steel plate.
 
- Cabinet body(frame, door): overall assembly structure, made of 1.0mm thick galvanized steel plate, with surface coated by epoxy resin powder.2. Handle: embedded type or U type alum-alloy handles or bent type integrative handles, strong solid and elegant appearance.

Technical SpecificationsNotes:
1 We can design and manufacture non-standard dimension as per use's' requirements.
2. The price excluding vent blower, vent duct& elbow, and water sink&tap, flow control valve& cock are optional.

Optional Accessories
1. centrifugal blower or axial flow blower, direct duct, T duct, elbow, etc
2. water sink, water faucet, cock&valve, etc

Application
- Electronics industry: dust free chamber, waste water& gas discharge from semiconductor factory, and equipment of related industries, etc
- Chemical industry: acid - resistant&alkali - resistant solution tank, washing tower, air duct and air pollution treatment equipment, etc
- Electroplating industry PCB plating, hardware plating, plastic plating, electrolyte tank and cleaning, filtration equipment, etc
- Food industry: food processing equipment, containers and kitchen cutting boards, etc
- biological pharmacy, biological analysis, plant culture, environmental test, electronic instruments and scientific research, etc.

Packaging&Shipping
Both of weight and dimension are big, generally the lab benches, fume hoods or lab cabinets shall be shipped by Sea;
They would be packed in cartons (FCL shipping) or plywood boxes(LCL shipping) in assembled or disassembled state.

Of course they can be shipped by Air or Courier if you can accept the shipping cost!

Project Cases
Desription:
6 laboratory fume hoods 1200*850*2350mm for local school use (from Zimbabwe feedback)

Description:
The 13 fume hoods for Zambia petroleum(refine oil)laboratory, which were installed, and work well now

Customer Visit
- Zambia Customer Visit
The Zambia customer only 1 guy, who ordered 13 fume hoods 1600*850*2350mm, and another 40 ones are under discussion, just wait for the goverment prodecure, will be confirmed soon.

We have further discussion for future cooperation like warehouse for our lab furniture, and they company will pay a visit again next year.

- Zimbabwe Customer Visit
who ordered six lab fume hoods 1200*850*2350mm (also 2 emergency shower eye washes and 40 water taps)as trial order, they came to check the goods before shipping.

The coming sample order: island bench 3000*1500*850mm and wall bench 1500*750*850mm &wall cabinet 1500*350*600mm intended for their showing room.

And we both hope to extend our products to Zimbabwe and countries nearby, and the sole distribution agreement under discussion.

Company Profile
Xuecheng Global Trader Co., Ltd is one professional industry and trade company for lab furniture, integrating production, R&D, sales, installation and after-sale service, located in beautiful Olympic Sailing City- Qingdao, China.

After years' development, we have grown into one diversified company, engaged in lab furniture, lab equipment, medical equipment, etc

Manufacturing&Shipping Process
1. Raw materials preparation (kinds of wood boards, plastic boards, steel plates, furniture hardware accessories, etc)  
2. Cutting
3. Punching
4. Welding
5. Bending
6. Baking and Painting(semi- product)
7. Assembly
8. Packing
7. Shipping

Certification
CE, SGS

 
sales(a)china-labfurniture()com
sales(a)xuecheng-globe()com
XUECHENG-GLOBE()NET
XUECHENG-GLOBE()COM
FACEBOOK()COM/XUECHENGLAB
INSTAGRAM()COM/XUECHENGLAB