Lab Walk in Type Fume Cupboard All Steel 4 Feet Fume Hood

All Steel Structure Walk In Type Lab Fume Hood 1200*850*2350mm

Fume hood is one kind of lab furniture, essential for laboratory, which plays the role of exhaust and ventilation. It is one of the most commonly used local exhaust equipment in the laboratory.

The structure of walk in fume hood is floor type, there is an exhaust hole at the top, which can be installed with vent blower.

The fume hood has lining&guide baffles, controller, lamp, sockets, etc. and the visible window adopts tempered glass, can be moved up-down, freely operated by the personnel.

Features
 adopts double-layer structure design. 

- The outer layer is steel shell, with 1.0mm thick galvanized steel platestamped and bent into one piece, the surface is coated by electrostatic spraying epoxy resin powder, acid and alkali resistance, corrosion resistance, the adhesive force of its spraying epoxy resin protective coating is good after the test of drop impact;
- The inner layer is lining baffles, use 5 mm thick compact laminate (compact chemical base board) to make, including top baffle, side baffle, back baffle, guide baffle, coated by electrostatic spraying epoxy resin powder, has excellent effect for moisture resistance, bending resistance and impact resistance;

1. The guide baffles adopt 3-section exhaust design, can eliminate the exhaust dead corners and contribute to discharge gases with different densities; also keep the fume hood section face velocity at about 0.5m/s (100fpm).
2. It adopts side or back counterweight structure and knock-down movable baffles(with maintenance window), which is convenient for maintenance and upgrade of counterweight, water, electricity and gas.

- Sash(Sliding Window) System

1. Visible window: ≥5mm thick anti-explosion tempered glass, slides smoothly, can stop at any position of the track, which is convenient to operate; the max opening height is not more than 750mm.
2. T01 Steel-wire Rope drive or T02 Belt drive counterweight
3. Metal window frame and alum-alloy U type handle or PP integrative handle

- Electrical System

1. Controller: LCD screen intelligent control panel is set on one side of outer column, which is convenient for observation and operation.
2. Socket(60*60mm): use multifunctional sockets with dust-spray proof protecting cover, suitable for all kinds of lab equipment.
3. Lighting: use integral LED lamp, hidden in the top baffle, will not be in touch with the gases of the fume hood, easy to be changed, the luminance is enough for experiment purpose.
4. Circuit Breaker: equipped with overload and short circuit protection safety device.

Technical Drawing&Specifications1.We can design and manufacture non-standard dimension as per user's requirement.
2.The price excluding vent blower, vent ducting& elbow, water sink&tap, flow control valve&cock, etc

Optional Acessories
water (sink and faucet), ducing(vent duct and elbow), vent blower, cock&valve, etc

Packaging&Shipping
Both of weight and dimension are big, lab benches, fume hoods or lab cabinets are generally going to be shipped by Sea;
They would be packed in cartons (FCL shipping) or plywood boxes(LCL shipping) in assembled or disassembled state.

Of course they can be shipped by Air or Express if you can accept the shipping cost!

Application
- Electronics industry: dust free chamber, waste water& waste gas discharge from semiconductor factory, and equipment of related industries, etc
- Chemical industry: acid - resistant&alkali - resistant solution tank, washing tower, air duct and air pollution treatment equipment, etc
- Electroplating industry PCB plating, hardware plating, plastic plating, electrolyte tank and cleaning, filtration equipment, etc
- Food industry: food processing equipment, containers and kitchen cutting boards, etc
- Biological pharmacy, biological analysis, plant culture, environmental test, electronic instruments and scientific research, etc.

Company Profile
Xuecheng Global Trader Co., Ltd is one professional industry and trade company for lab furniture, integrating production, R&D, sales, installation and after-sale service, located in beautiful Olympic Sailing City- Qingdao, China.

After years' development, we have grown into one diversified company, engaged in all kinds of lab furniture, lab equipment, medical equipment, etc

Workshop& Production Line

1. Raw materials preparation (mainly kinds of plastic boards, wood boards, steel plates, etc)
2. Cutting
3. Punching
4. Welding
5. Bending
6. Baking and Painting(semi- product)
7. Assembly
8. Packing
7. Shipping

Certification
CE, SGS

For more information, welcome to inquire us at any time!
 
sales(a)china-labfurniture()com
sales(a)xuecheng-globe()com
xuecheng-globe()com
xuecheng-globe()net
facebook()com/xuechenglab
instagram()com/xuechenglab